Difference between revisions of "Winch Maintenance Schedule"

From SSS Wiki
Jump to navigationJump to search
(Created page with ' == Tost Winch Maintenance Schedule == '''Daily''' (Driver inspection - see also Winch Driver's Manual) Check and top up if necessary, the following on both winch …')
 
(→‎Tost Winch Maintenance Schedule)
(Tag: Blanking)
 
Line 1: Line 1:
−
 
  
−
== Tost Winch Maintenance Schedule ==
 
−
 
−
 
−
'''Daily''' (Driver inspection - see also Winch Driver's Manual)
 
−
 
−
Check and top up if necessary, the following on both winch and road chassis:
 
−
 
−
> Engine oil
 
−
 
−
> Auto transmission oil
 
−
 
−
> Radiator
 
−
 
−
> Fuel
 
−
 
−
Check fan belt - condition and tension
 
−
 
−
Check function of lights and gauges
 
−
 
−
Check serviceability of paying on gear and guillotines
 
−
 
−
Check tyres fully inflated
 
−
 
−
'''Monthly'''
 
−
 
−
Functional check of guillotines (without cutting cable) - BGA requirement
 
−
 
−
Check paying on rollers - lubricate as necessary, replace damaged items
 
−
 
−
'''Quarterly'''
 
−
Check function of all gauges and warning lights
 
−
 
−
Check setting and function of rev limiter
 
−
 
−
Check fan belt - condition and tension
 
−
 
−
Check and top up if required, the following on both winch and road chassis;
 
−
 
−
> Engine oil (change oil and filter if engine is in 'daily' use)
 
−
 
−
> Auto transmission oil
 
−
 
−
> Radiator
 
−
 
−
> Main gearbox
 
−
 
−
> Right angle drive/back axle
 
−
 
−
> Dog clutch housings
 
−
 
−
> Scroll gear housings
 
−
 
−
> Brake fluid
 
−
 
−
> Clutch fluid
 
−
 
−
> Batteries
 
−
 
−
Investigate reasons for any significant topping up
 
−
 
−
Lubricate paying on gear pivots
 
−
 
−
Lubricate dog clutch selectors and linkage
 
−
 
−
Check/adjust tyre pressures. Check for damage or wear.
 
−
 
−
'''Half yearly'''
 
−
 
−
'''Important - check 300 lbs/ft torque on half shaft nuts'''
 
−
 
−
Change auto transmission oil and filter
 
−
 
−
'''Every autumn'''
 
−
 
−
Inspect hoses - replace if cracked or leaking
 
−
 
−
Check security of all hose clips
 
−
 
−
Check fan belt - condition and tension
 
−
 
−
Drain and refill cooling system with 30% (min) antif-freeze solution
 

Latest revision as of 16:04, 9 September 2021