Gas Mixer

From SSS Wiki
Revision as of 12:28, 8 May 2019 by Chair (talk | contribs)
Jump to navigationJump to search
  • Tuning the Impco C1-30 gas mixer
  • The adjusting screws are illustrated in this diagram Media:Gas Carb.jpg‎ . Correct mixture is achieved by winding the adjusting screw out until the engine runs rough and then back in again until it runs smoothly. This must be done at tick-over using the small screw above the throttle adjustment screw (marked IDLE) and on 'Wide Open Throttle' using the large hexagon headed screw (marked WOT).
Retrieved from "https://wiki.shalbournegliding.co.uk/members/wiki/index.php?title=Gas_Mixer&oldid=1111"